Tuesday, 29 January 2013


Sample card 3 using the new Rainbow Butterflies Digikit.

You will need a graphics programme such as CAP2 or MCS.

This card uses Rainbow Butterflies set 2.

1:   Create a dark grey square approx. 12 cm x 12 cm in your graphics programme.
2:   Import the embossed paper, re-size and position over the grey square leaving a small border.
3:   Import the textured paper and crop either side of the centre to make a strip / border. Copy and reverse 
      the border and place both strips as illustrated.
4:   Create a white strip in your programme and place between the textured borders.
5:   Import the butterfly, re-size and angle to approx 20 degrees. Copy and reverse the image so there are
      5 butterflies. Position them along the white strip as illustrated.
6:   'Deconstruct' and copy the group of 5 butterflies.
7:   Print the card on to good quality card.
8:   Print the 5 butterflies on to vellum. Cut around the antennae.
9:   Cut the butterflies out and glue just the body section over those on the card.
10: Add border peel-offs if wished.


No comments:

Post a Comment

Thank you for your comments, they are greatly appreciated.